Zone Fly Industrial and Trade Co., Ltd.

　

Non-Ferrous Blades Saws for Non-Ferrous Metal
		For cutting aluminum sheets, tubing extrusions and other non-ferrous metals such as copper, brass, lead and magnesium. For smooth cutting, use lots of lubricant and a clamping device. Note: The material must be clamped firmly to the table on both sides during cutting operation. The use of coolant is very important. Item 7 1/4-48 N/F has a diamond knockout.
		Tool No. Diameter Teeth Kerf Bore 6 1/4-48 N/F 6 1/4" 48 .110" (2.8mm) 5/8" 7 1/4-48 N/F 7 1/4" 48 .110" (2.8mm) 5/8" 7 1/4-58 N/F 7 1/4" 58 .110" (2.8mm) 5/8" 8-48 N/F 8" 48 .110" (2.8mm) 5/8" 8-64 N/F 8" 64 .110" (2.8mm) 5/8" 8.5-64 N/F 8 1/2" 64 .110" (2.8mm) 5/8" 9-60 N/F 9" 60 .110" (2.8mm) 5/8" 10-60 N/F 10" 60 .126" (3.2mm) 5/8" 10-80 N/F 10" 80 .126" (3.2mm) 5/8" 10-100 N/F 10" 100 .126" (3.2mm) 5/8" 12-72 N/F 12" 72 .126" (3.2mm) 1" 12-96 N/F 12" 96 .126" (3.2mm) 1" 13-80 N/F 13" 80 .126" (3.2mm) 32mm 13-102 N/F 13" 102 .126" (3.2mm) 1" 14-84 N/F 14" 84 .126" (3.2mm) 1" 14-108 N/F 14" 108 .126" (3.2mm) 1" 15-100 N/F-1 15" 100 .126" (3.2mm) 1" 15-100 N/F 15" 100 .126" (3.2mm) 32mm 16-96 N/F 16" 96 .149" (3.8mm) 1" 16-120 N/F 16" 120 .149" (3.8mm) 1" 18-108 N/F 18" 108 .157" (4.0mm) 1" 18-120 N/F 18" 120 .157" (4.0mm) 1" 20-120 N/F 20" 120 .173" (4.4mm) 1"